This section explains how to put on and adjust your equipment.
After you've done a thorough check of your gear, you'll be ready to put it on your back. Start by putting on the leg straps by resting the parachute on a bench. Then put on the shoulder pads. Once the parachute is on your back, you will ALWAYS start by attaching your chest strap. Once attached, the buckle should display the FABRIC - METAL - FABRIC pattern.
Chest strap buckle
The next step is to adjust the leg straps. They should be tight enough, without being uncomfortable. Your instructor will guide you through this step. Make sure you have the same length of strap on each leg so the fit is symmetrical.
Once the equipment is adjusted, you can perform the 4-points check seen in the previous section. Then ask your instructor to check your closing pins and perform a radio test.
Finally, make sure you have everything you need (helmet, radio, altimeter, goggles) and go to the boarding area.